Physics, 23.01.2020 22:31 mariaaaaa69

This is a computer program, why is there an error between the computer values and the nominal values of r?

Answers: 2

Show answers

Answers

Answer from: zitterkoph

the difference is due to resistance tolerance

Explanation:

In mathematical calculations, either done by hand or in a computer program, the heat taken from the resistors is the nominal value, which is the writing in its color code, so all calculations give a result, but the Resistors have a tolerance, indicated by the last band that is generally 5%, 10%, 20% and in the expensive precision resistance can reach 1%.

This tolerance or fluctuation in the resistance value is what gives rise to the difference between the computation values and the values measured with the instruments, multimeters.

Another source of error also occurs due to temperature changes in the circuit that affect the nominal resistance value, there is a very high resistance group that indicates the variation with the temperature, they are only used in critical circuits, due to their high cost

In summary, the difference is due to resistance tolerance.

Answer from: Quest

force is based upon mass and acceleration.the statement is not always true.

it can be explained from newton's second law of motion.

as per newton's second law of motion the rate of change of momentum is directly proportional to the applied force and takes place along the direction of force.

mathematically it can be written as -

$f\alpha \frac{dp}{dt}$

⇒ $f= k \frac{dp}{dt}$

here k is the proportionality constant whose value is 1.

$f=\frac{dp}{dt}$

$f= \frac{d[mv]}{dt}$

$f= m\frac{dv}{dt} +v\frac{dm}{dt}$

$f=ma+v\frac{dm}{dt}$ [a is the acceleration=dv/dt]

hence we see that force not only depends on mass and acceleration but also on velocity and rate of change of mass. force f will depend on mass and acceleration only when mass is constant.

hence the statement that force is based upon mass and acceleration is false.

Answer from: Quest

it's when something is going so fast it makes a loud noise, breaking the sound barrier, for example: a jet makes a loud noise, not only cause of the jet but because they reached a point where they went so fast that you can year the noise from various parts, kinda like a police car, lets say the car was going so fast that you hear the siren of the cop car right next to you, but the car is probably a mile a way, it's cos the siren was next to you a few seconds if you understand me

Another question on Physics

Physics, 21.06.2019 17:20

American eels (anguilla rostrata) are freshwater fish with long, slender bodies that we can treat as uniform cylinders 1.0 m long and 10 cm in diameter. an eel compensates for its small jaw and teeth by holding onto prey with its mouth and then rapidly spinning its body around its long axis to tear off a piece of flesh. eels have been recorded to spin at up to 14 revolutions per second when feeding in this way. although this feeding method is costly in terms of energy, it allows the eel to feed on larger prey than it otherwise could. 1.a field researcher uses the slow-motion feature on her phones camera to shoot a video of an eel spinning at its maximum rate. the camera records at 120 frames per second. through what angle does the eel rotate from one frame to the next? 2. the eel is observed to spin at 14 spins per second clockwise, and 10 seconds later it is observed to spin at 8 spins per second counterclockwise. what is the magnitude of the eels average angular acceleration during this time? 3. the eel has a certain amount of rotational kinetic energy when spinning at 14 spins per second. if it swam in a straight line instead, about how fast would the eel have to swim to have the same amount of kinetic energy as when it is spinning? 4.a new species of eel is found to have the same mass but one-quarter the length and twice the diameter of the american eel. how does its moment of inertia for spinning around its long axis compare to that of the american eel?

Answers: 1

Answer

Physics, 22.06.2019 11:00

Which of the following are guidelines to follow for obtaining accurate observations

Answers: 2

Answer

Physics, 22.06.2019 19:30

Emagnitude of the electrical force acting between a +2.4 × 10–8 c charge and a +1.8 × 10–6 c charge that are separated by 0.008 m is n, rounded to the tenths place.

Answers: 3

Answer

Physics, 22.06.2019 20:40

In addition to gravity, what is the other predominant force that affects the motion of a pendulum?

Answers: 1

Answer

You know the right answer?

This is a computer program, why is there an error between the computer values and the nominal values...

Questions