Physics, 16.12.2019 22:31 itsyeboiwolfie2500

Awheel is rotating about a fixed axis with constant angular acceleration 3 rad/s2. at different moments, its angular speed is ? 2 rad/s, 0, and +2 rad/s. for a point on the rim of the wheel, consider at these moments the magnitude of the tangential component of acceleration and the magnitude of the radial component of acceleration. rank the following five items from largest to smallest: if two items are equal, show them as equal in your ranking. if a quantity is equal to zero, show that in your ranking. (use only "> " or "=" symbols. do not include any parenthesis around the letters or symbols.)

(a) |at| when ? = ? 2 rad/s

(b) |ar| when ? = ? 2 rad/s

(c) |ar| when ? = 0

(d) |at|when ? = 2 rad/s

(e) |ar| when ? = 2 rad/s

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 15:20

Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2

Answers: 2

Answer

Physics, 22.06.2019 15:50

Select all the correct answers. which changes will increase the rate of reaction during combustion? decreasing the area of contact between the reactants adding more oxygen to the reaction removing heat from the reaction changing the reactants from solid form to powdered form lowering the exposure of the reactants to air

Answers: 3

Answer

Physics, 23.06.2019 01:30

Each line (unit) on the horizontal axis represents: 5 years 10 years 20 years all of the above

Answers: 1

Answer

Physics, 23.06.2019 02:50

Orque can be calculated by multiplying the force (n) applied at 90∘ to the lever arm at a distance (m) from the pivot point (point of rotation), the compound si unit for the torque is n⋅m. if the force (at 90∘ to the lever arm) applied is 15 n and it is applied at 2.0 m from the pivot point (point of rotation), what is the torque on the lever?

Answers: 2

Answer

You know the right answer?

Awheel is rotating about a fixed axis with constant angular acceleration 3 rad/s2. at different mome...

Questions