Physics, 07.12.2019 10:31 sierravick123owr441

Determine the work that is being done by tension in pulling the box 178.0 cm along the table.
also determine the speed of the box after traveling the specified distance.
7.9 n
μ= 0.28
1.5 kg

Determine the work that is being done by tension in pulling the box 178.0 cm along the table.

Answers: 1

Show answers

Answers

Answer from: vlarocca17

1. A force of 25.0 Newtons is applied so as to move a 5.0 kg mass a distance of 20.0 meters. How much work was done?
Ans. W = F × d = 25 N × 20.0 m = 50 J
2. A force of 120 N is applied to the front of a sled at an angle of 28.0 above the horizontal so as to pull the sled a distance of 165 meters. How much work was done by the applied force?
Ans. W = F •d cos  = 120 N • 165 m cos 28.0 = 17,482.36 J
3. A sled, which has a mass of 45.0 kg., is sitting on a horizontal surface. A force of 120 N is applied to a rope attached to the front of the sled such that the angle between the front of the sled and the horizontal is 35.0o. As a result of the application of this force the sled is pulled a distance of 500 meters at a relatively constant speed. How much work was done to this sled by the applied force?
Ans. W = F• d cos  = 120 N • 500 m • cos 35.0 = 49,149.12 N
4. A rubber stopper, which has a mass of 38.0 grams, is being swung in a horizontal circle which has a radius of R = 1.35 meters. The rubber stopper is measured to complete 10 revolutions in 8.25 seconds.
a. What is the speed of the rubber stopper?
Ans. v =  v = •  v = .•(. ) v = 10.29 m/s .
b. How much force must be applied to the string in order to keep this stopper moving in this circular path at a constant speed?
Ans. The Centripetal Force, Fc = • = . • (. /)= 29.76 N .
c. How far will the stopper move during a period of 25.0 seconds?
Ans. d = vt = 10.29 m/s25 s = 257.25 m
d. How much work is done on the stopper by the force applied by the string during 25.0 seconds?
Ans. 0 J. The force is towards the center and the distance is around the perimeter of the circle. They are at right angles to each other. For work to be done, the force has to be in the same direction as the displacement.
5. How much work would be required to lift a 12.0 kg mass up onto a table 1.15 meters high?
Ans. W = F• d = mg d = 12 kg  9.8 m/s2  1.15 m = 135.24 J

Answer from: Quest

explanation:

v=uf/(u-f)

= 5.10/(5-10) convex lens has positive focal length

=50/-5

=-10 cm (formed at other side)

An object is located 5.0 cm from a convex lens. the lens focuses light at a distance of 10.0 cm. wha

Answer from: Quest

massxgravity x heght=weightxheight= pe

4900=490xh

h=10

Another question on Physics

Physics, 22.06.2019 02:30

Which type of bond is found between the atoms of a molecule? a. metallic b. delocalized electron c. covalent d. ionic

Answers: 1

Answer

Physics, 22.06.2019 02:50

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Answers: 3

Answer

Physics, 22.06.2019 05:30

Agas expands from an initial volume of 0.040 m^3 and an initial pressure of 210 kpa to a final volume of 0.065 m^3 while its temperature is kept constant. how much work is done by the system?

Answers: 1

Answer

Physics, 22.06.2019 13:00

Which of the following are appropriate acceleration units?

Answers: 1

Answer

You know the right answer?

Determine the work that is being done by tension in pulling the box 178.0 cm along the table.
...

Questions