subject
Physics, 04.12.2019 06:31 imanim3851

Consider a rifle, which has a mass of 2.44 kg and a bullet which has a mass of 150 grams and is loaded in the firing chamber. when the rifle is fired the bullet leaves the rifle with a muzzle velocity of 440 m/s; a. what will be the momentum of the rifle immediately before the bullet is fired? b. what will be the momentum of the rifle-bullet combination before the bullet is fired? c. what will be the momentum of the bullet immediately after the rifle has been fired? d. what will be the momentum of the rifle immediately after it has been fired? e. what will be the momentum of the rifle-bullet combination immediately after the bullet had been fired? f. what will be the velocity of the rifle immediately after the rifle has been fired? g. after the rifle has been fired it comes into contact with the marksman’s shoulder and then comes to a halt during a timeperiod of 0.38 seconds. what is the average force applied to the rifle by the shoulder? after the bullet leaves the rifle is strikes a block of wood which has a mass of 5.10 kg. and is sitting on a horizontalsurface which has a coefficient of sliding friction ofm= 0.83 .h. what will be the velocity of the bullet-block combination immediately after the bullet strikes the block of wood? i. how far will the block slide along the horizontal surface before it comes to a halt? j. how much energy was lost as the bullet was lodged in the block of wood?

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 11:20
The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)
Answers: 3
question
Physics, 22.06.2019 15:40
Apotter's wheel moves uniformly from rest to an angular speed of 0.20 rev/s in 32.0 s. (a) find its angular acceleration in radians per second per second. rad/s2 (b) would doubling the angular acceleration during the given period have doubled final angular speed?
Answers: 1
question
Physics, 22.06.2019 16:50
Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.
Answers: 2
question
Physics, 23.06.2019 01:30
The flow of electrons from one atom to another is called
Answers: 1
You know the right answer?
Consider a rifle, which has a mass of 2.44 kg and a bullet which has a mass of 150 grams and is load...
Questions
question
Engineering, 14.11.2020 08:00
question
Chemistry, 14.11.2020 08:00
question
Biology, 14.11.2020 08:00
question
Geography, 14.11.2020 08:00
Questions on the website: 13722363