Underground water is to be pumped by a 78 percent efficient 5-kw submerged pump to a pool whose free surface is 30 m above the underground water level. the diameter of the pipe is 7 cm on the intake side and 5 cm on the discharge side. determine (a) the maximum flow rate of water and (b) the pressure difference across the pump. assume the elevation difference between the pump inlet and the outlet and the effect of the kinetic energy correction factors to be negligible.

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.