Studies on a machine that molds plastic water pipe indicate that when it is injecting 1-inch-diameter pipe, the process standard deviation is 0.05 inches. the 1-inch pipe has a specification of 1 inch plus or minus 0.10 inch. what is the process capability index ( cpk) if the long-run process mean is 1 inch? a. 1.00 b. 0.67 c. 2.20 d. 0.50 e. 2.00

What object a collides with object b and bounces back its final momentum is?

The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)

When flexing to a reflective style, one should be specific, brief and to the point, and maintain a fast and decisive pace?