The amount of the lighted side of the moon you can see is the same during
a. new moon and full moon phase.
b. new moon and first quarter phase.
c. first quarter and third quarter phase.
d. full moon and third quarter phase.

The amount of the lighted side of the moon you can see is the same during first quarter and third quarter phase. The answer is letter C. The moon surface is visible to an observer on earth due to the gravitational force that attracts the moon to the earth. The more massive the body is, the more the smaller body is attracted to the larger body. We can only see the side of the moon due to the speed at which the moon rotates.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).