Arescue worker pulls an injured skier lying on a toboggan (with a combined mass of 127 kg) across flat snow at a constant speed. a 2.43 m rope is attached to the toboggan at ground level, and the rescuer holds the rope taut at shoulder level. if the rescuer's shoulders are 1.65 m above the ground, and the tension in the rope is 148 n, what is the coefficient of kinetic friction between the toboggan and the snow?

0.088

Explanation:

from the question we are given the following

combined mass (m) = 127 kg

acceleration (a) = 0  (because speed is constant)

length of the rope = 2.43 m

height of the rescuers shoulder = 1.65 m

tension in the rope (T) = 148 N

acceleration due to gravity (g) = 9.8 m/s^2

coefficient of kinetic friction (μ) = ?

firstly from the diagram attached we can see that the rope and the rescuer with the ground for a right angled triangle with the rescuer being the opposite side and the rope being the hypotenuse. We can calculate the angle (θ) between the rope and the ground using the formula

sin θ = opposite / hypotenuse

θ = sin^(-1)   x   (opposite / hypotenuse ) =  sin^(-1)   x   (1.65 / 2.43 )

θ = 42.8 degrees

we can get the coefficient of kinetic friction by applying the formula below

net force = force  by the rescuer - force of kinetic friction (force as a result of kinematic friction)  .....equation 1

where

        force of kinetic friction = (( 127 x 9.8 ) - ( 148 x sin 42.8)) x  μ

        force of kinetic friction = (1244.6 - 100.6) x μ = 1144μ

now substituting all the values in to equation 1 we have

0 =100.49 - 1144μ

1144μ = 100.49

μ = 0.088

luster is not a good characteristic to use by itself because luster is the property of minerals that indicates how much the surface of a mineral reflects light. the luster of a mineral is affected by the brilliance of the light used to observe the mineral surface.

find the surface area of the sphere to the nearest square unit. use a calculator.

a. 254 in.2

b. 64 in.2

c. 127 in.2

d. 1,018 in.2