Physics, 01.11.2019 01:31 jdodger5165

You create a plot of voltage (in v) vs. time (in s) for an rc circuit as the capacitor is charging, where v=v_{0} \cdot \left(1- e^{ \frac{-\left(t\right)}{rc} } \right). you curve fit the data using the inverse exponent function y=a \cdot \left(1- e^{-\left(cx\right)} \right)+b and loggerpro gives the following values for a, b, and c. a = 4.211 ± 0.4211 b = 0.1699 ± 0.007211 c = 1.901 ± 0.2051 what is the time constant for and its uncertainty?

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 13:30

6–48 bananas are to be cooled from 24 to 138c at a rate of 215 kg/h by a refrigeration system. the power input to the refrigerator is 1.4 kw. determine the rate of cooling, in kj/ min, and the cop of the refrigerator. the specific heat of banana above freezing is 3.35 kj/kg·8c.

Answers: 3

Answer

Physics, 22.06.2019 14:40

On a geologic map, if the contacts between sedimentary rock units form a bull’s-eye pattern of concentric circles, with the youngest unit in the center, the underlying structure is a(n)

Answers: 3

Answer

Physics, 22.06.2019 15:30

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Answers: 1

Answer

Physics, 22.06.2019 21:30

In the illustration, which two simple machines are being used to enable the student to reach the door? a. inclined plane and pulley b lever and wheel-and-axle c pulley and lever d wheel-and axle and inclined plane

Answers: 1

Answer

You know the right answer?

You create a plot of voltage (in v) vs. time (in s) for an rc circuit as the capacitor is charging,...

Questions