Physics, 28.10.2019 23:31 Whitehouse9

You place a 3.0-m-long board symmetrically across a 0.5-m-wide chair to seat three physics students at a party at your house. if 65-kg dan sits on the left end of the board and 50-kg tahreen on the right end of the board, where should 54-kg komila sit to keep the board stable? ignore the mass of the board and treat each student as point-like objects. the positive x-direction is to the right, and the origin is at the center of the chair.

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 14:00

How much heat is required to convert 0.3 kg of ice at 0°c to water at the same temperature

Answers: 1

Answer

Physics, 22.06.2019 02:50

20. threshold braking in the vehicle's braking system occurs when a. the brake pedal is pushed, heel on floorboard, with full foot pressure. b. the brakes are exerting full braking power, without traction loss. c. the driver begins pushing down the brake pedal, with moderate slowdown. d. the brakes just begin to take hold with a gradual slowdown.

Answers: 3

Answer

Physics, 22.06.2019 12:30

An object resting on a table weighs 100 n. with what force is the object pushing on the table? with what force is the table pushing on the object? explain how you got your answer.

Answers: 2

Answer

Physics, 22.06.2019 16:50

Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =

Answers: 1

Answer

You know the right answer?

You place a 3.0-m-long board symmetrically across a 0.5-m-wide chair to seat three physics students...

Questions

Physics, 24.04.2020 22:59

A collar with a mass of m can slide along a smooth (frictionless) shaft with angle α measured from horizontal direction. The collar is attached to a l...

Engineering, 24.04.2020 22:59

The fatigue data for a brass alloy are given as follows: Stress Amplitude (MPa) Cycles to Failure 170 3.7 × 104 148 1.0 × 105 130 3.0 × 105 114 1.0 ×...