Physics, 23.10.2019 23:00 lizzyhearts

Aflat solid disk of radius r and mass m is around vertical axle going through a center of mass of a disk. suddenly a hoop of mass m and radius r is falling coaxially on the disk. hoop did not rotate initially. if rotational energy of the system was initially re, what is rotational energy of the system after hoop has landed?

Answers: 2

Show answers

Answers

Answer from: charity56

Kf = 2/9 RE

Explanation:

The initial mechanical energy of the system is the sum of the kinetic and potential energy of the two bodies as the height does not change we can take the zero in the position of the disk, the ring is still so it has no energy and the energy disk is energy rotation kinetics

K = ½ m₁ w₁²

In the final position the disc and the ring rotate together, so calluses contribute energy

Kf = K₁ + K₂ = ½ (m₁ + m₂) w₂²

Where m1 is the mass of the disk, m2 the mass of the ring and w is the initial and final angular velocity

To find the final angular velocity, we treat the case as an inelastic shock, where the kinetic moment (L) is preserved, the system is formed by the two bodies.

L₀ = Lf

L₀ = I₁ w₁ + 0

Lf = (I₁ + I₂) w₂

I₁ w₁ = (I₁ + I₂) w ₂

w₂ = I₁ / (I₁ + I₂) w₁

We take the kinetic moments of the bodies

Disk I₁ = ½ m₁ R₁²

Hoop I₂ = m₂ R₂²

Let's calculate the final angular velocity

w₂ = ½ m₁ R² / (1/2 m₁ R² + m₂ R²) w₁

w₂ = ½ m₁ / (m₁/2 + m₂) w₁

With this value we can substitute and calculate the final kinetic energy

Kf = ½ (m₁ + m₂) [½ m₁ / (m₁ /2 + m₂) w₁]²

Kf = 1/8 [(m₁ + m₂) m₁² / (m₁/2 + m₂)²] w₁²

Let's substitute the values that the mass and radius of the disc and ring give us are the same (M, R)

Kf = 1/8 [2M M² / (3M/2)²] w₁² = ¼ M³ / (9M² /4) w₁²

Kf = 1/9 M w₁²

This is the final kinetic energy, let's say it based on the initial (RE)

Ko = RE = ½ M w₁²

Kf / Ko = (1/9 M w₁²) / (1/2 M w₁²)

Kf / RE = 2/9

Kf = 2/9 RE

This loss of kinetic energy is transformed into internal energy during the crash

Answer from: Quest

“when two plates carrying continents collide, the continental crust buckles and rocks pile up, creating towering mountain ranges. when an ocean plate collides with another ocean plate or with a plate carrying continents, one plate will bend and slide under the other. this process is called subduction. “ i found this on google i hope it

Answer from: Quest

wind moving at higher speeds will transfer more energy to the water, resulting in stronger waves.

brainliest if you have proof from k12 test and provide evidence wit image! provide image evi

Another question on Physics

Physics, 22.06.2019 03:30

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.

Answers: 3

Answer

Physics, 22.06.2019 07:30

Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.

Answers: 3

Answer

Physics, 22.06.2019 08:30

Researchers determine that the biodiversity in a woodland region is declining. they identify two major threats to the region's biodiversity, a method to address each threat, and the expected outcome of each method. this information is shown in the table. a) reforestation would not benefit many species because most forest species live on the ground. b) reforestation would take the longest time to be effective because trees take several years to grow. c) biological augmentation would benefit only a few species because is is typically not very effective. d) biological augmentation would take less time to ve effective because it targets the majority of prey species.

Answers: 3

Answer

Physics, 22.06.2019 09:30

Astone is dropped from a cliff and falls 9.44 meters. what is the speed of the stone when it reaches the ground? a. 13.6 m/sec b. 1.39 m/sec c. 185 m/sec d. 9.80 m/sec

Answers: 3

Answer

You know the right answer?

Aflat solid disk of radius r and mass m is around vertical axle going through a center of mass of a...

Questions