Acylindrical rod 120 mm long and having a diameter of 15.0 mm is to be deformed using a tensile load of 35,000 n. it must not experience either plastic deformation or a diameter reduction of more than 1.2 × 10–2 mm. of the following materials listed, which are possible candidates? justify your choice(s).

Magnesium Alloy

Explanation:

Cross sectional area A = (pi/4)d sqr

A = pi / 4 x 0.015 sqr

A = 1.76 x 10^-4 m2

Stressed induced in rod S = P/A = 35000/1.76x 10^-4

S= 198.06 M Pa

Reduction in diameter of the titanium alloy = -v (alpha/E) x d

= - 0.33 (( 198.06 X 10^6) / 70 x 10^9 )x 0.015 = - 1.41 x 10^-2 mm

For steel alloy

= - 0.36 (( 198.06 X 10^6) / 150 x 10^9 )x 0.015 = - 1.02 x 10^-2 mm

For magnesium

= 0.27 (( 198.06 X 10^6) / 205 x 10^9 )x 0.015 = 0.391 x 10^-2 mm

The titanium alloy and the steel alloy does not satisfy the second criteria since the reduction in diameter exceeds the allowable limit of 1.2 x 10^2mm
Considering the yield strength of the material, we find the aluminium alloy is not suitable and hence no need to check for the second criteria. By considering the both the given conditions, we find the magnesium alloy is the suitable material.

"i have always loved contemporary art and made it a general goal to work within the field. after a few nonprofit internships at museums and galleries, i decided to try the for-profit art world and was offered a job as the ad assistant at the magazine. i much prefer the pace of the for-profit art community and have stayed with the company for three years, with a promotion to an account manager last spring."

i just did this and got a 100.