Atank of fixed volume contains brine with initial density, rhoi, greater than water. pure water enters the tank steadily and mixes thoroughly with the brine in the tank. the liquid level in the tank remains constant. derive expressions for (a) the rate of change of density of the liquid mixture in the tank and (b) the time required for the density to reach the value rhof , where rhoi > rhof > rhoh2o

An object thrown vertically upward from the surface of a celestial body at a velocity of 36 m/s reaches a height of sequalsminus0.9tsquaredplus36t meters in t seconds. a. determine the velocity v of the object after t seconds. b. when does the object reach its highest point? c. what is the height of the object at the highest point? d. when does the object strike the ground? e. with what velocity does the object strike the ground? f. on what intervals is the speed increasing?

An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc

When the force acting on an object points at least partially in the direction of the motion the work done is considered to be negative