A22-in-long by 3.0-in-wide cast iron rectangular block is machined in a face milling operation using a 6.0-in-diameter cutter with 12 carbide inserts. the cutter path is centered over the width of the block. feed = 0.008 in/tooth and depth of cut = 0.60 in. at a cutting speed of 500 ft/min, the tool lasts for seven blocks. at a cutting speed of 250 ft/min, the tool lasts for 47 blocks. determine n and c in the taylor tool life equation. ignore the effect of the approach distance given by equation (21.18)

Along wire carrying a 4.2 a current perpendicular to the xy-plane intersects the x-axis at x=−1.7cm. a second, parallel wire carrying a 3.0 a current intersects the x-axis at x=+1.7cm. part a at what point on the x-axis is the magnetic field zero if the two currents are in the same direction? express your answer to two significant figures and include the appropriate units.

8.29 two streams containing pyridine and acetic acid at 25°c are mixed and fed into a heat exchanger. due to the heat-of-mixing effect, it is desired to reduce the temperature after mixing to 25°c using a stream of chilled ethylene glycol as indicated in the diagram. calculate the mass flow rate of ethylene glycol needed. the heat capacity of ethylene glycol at these conditions is approximately 2.8 kj/(kg k), and the enthalpy change of mixing (δmixh) is given below.

The great sandini is a 60.0-kg circus performer who is shot from a cannon (actually a spring gun). you don’t find many men of his caliber, so you him design a new gun. this new gun has a very large spring with a very small mass and a force constant of 1100 n/m that he will compress with a force of 4400 n. the inside of the gun barrel is coated with teflon, so the average friction force will be only 40.0 n during the 4.00 m he moves in the barrel. at what speed will he emerge from the end of the barrel, 2.50 m above his initial rest position?