Physics, 22.09.2019 22:30 deku6

25. a river flows toward the east. because of your
knowledge of physics, you head your boat
53° west of north and have a velocity of
6.0 m/s due north relative to the shore.
a. what is the velocity of the current?
b. what is your speed relative to the water?

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 15:30

Aforce of 100 newtons is used to move an object a distance of 15 meters with a power of 50 watts. find the work dine and the time it takes to do the work

Answers: 1

Answer

Physics, 22.06.2019 15:30

What is a subatomic particle with a negative charge and very little mass?

Answers: 1

Answer

Physics, 23.06.2019 02:30

Afaulty model rocket moves in the xy-plane (the positive y direction is vertically upward). the rocket's acceleration has components ax(t) = ? t2 and ay(t) = ? ? ? t, where ? = 2.50 m/s4 , ? = 9.00 m/s2 , and ? = 1.40 m/s3 . at t = 0 the rocket is at the origin and has velocity ~v0 = v0x ? i + v0y ? j with v0x = 1.00 m/s and v0y = 7.00 m/s. (a) calculate the velocity and position vectors as functions of time. (b) what is the maximum height reached by the rocket? (c) sketch the path of the rocket. (d) what is the horizontal displacement of the rocket when it returns to y = 0?

Answers: 1

Answer

Physics, 23.06.2019 08:30

Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28

Answers: 2

Answer

You know the right answer?

25. a river flows toward the east. because of your
knowledge of physics, you head your boat

Questions