The rectangular bar is connected to the support bracket with a 15-mm-diameter pin. the bar width is w = 85 mm and the bar thickness is 20 mm. each side of the bracket has the same dimensions as the bar. the average shear stress in the pin cannot exceed 135 mpa, the bearing stress in the bar cannot exceed 130 mpa, and the bearing stress in the bracket cannot exceed 150 mpa. determine the maximum value of pmax that can be supported by the structure.

The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.

Balloon a has charge q, and identical mass balloon b has charge 10q. you hang them from threads near each other. choose all of the statements with which you agree. check all that apply. a. a and b exert the same magnitude forces on each other. b. the force that a exerts on b is 10 times the force that b exerts on a. c. the angle between the thread supporting a and the vertical is < the angle between the thread supporting b and the vertical. d. the force that a exerts on b is 1/10 the force that b exerts on a.

The air in an automobile tire with a volume of 2.60 ft3 is at 70°f and 21 psig. determine the amount of air that must be added to raise the pressure to the recommended value of 30 psig. assume the atmospheric pressure to be 14.6 psia and the temperature and the volume to remain constant. the gas constant of air is ru = 53.34ft⋅lbflbm⋅r(1 psia144 lbf/ft2) = 0.3704 psia⋅ft3lbm⋅r the amount of air that must be added to raise the pressure is lbm