subject
Physics, 30.08.2019 22:30 jaymoore9542

What is the age of a sample if there are 6 grams of an element that have not decayed outof an original 24 grams and has a half-life of 8yrs a. 8yrs b. 50yrs c. 29yrs d. 16yrs

ansver
Answers: 3

Another question on Physics

question
Physics, 23.06.2019 08:00
Diego is trying to lift a piano to the second floor of his house. diego uses a pulley system and gives a big lift to the piano. the piano moves upward, then stops, and then it starts to fall to the ground. which list best describes the forces on the piano in the proper order? a.positive force, balanced force, negative force b.negative force, balanced force, positive force c.positive force, unbalanced force, negative force d. negative force, unbalanced force, positive force
Answers: 1
question
Physics, 23.06.2019 08:30
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
question
Physics, 23.06.2019 13:30
How many joules will be lost by 150 g of water if it is cooled from 90oc to 5oc?
Answers: 1
question
Physics, 23.06.2019 20:10
Five-gram samples of copper and iron are at room temperature. both samples receive equal amounts of energy due to heat flow. the specific heat capacity of copper is 0.09 cal/g°c, and the specific heat capacity of iron is 0.11 cal/g°c. which of the following statements is true?
Answers: 2
You know the right answer?
What is the age of a sample if there are 6 grams of an element that have not decayed outof an origin...
Questions
question
English, 05.10.2020 01:01
question
Biology, 05.10.2020 01:01
Questions on the website: 13722363