An ideal carnot engine operates between reservoirs having temperatures of 125°c and . each cycle the heat expelled by this engine is used to melt 30.0 g of ice at 0.00°c. the heat of fusion of water is and the heat of vaporization of water is .(a) how much work does this engine do each cycle?

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

a cold ice-tea.

pour in room temperature or cold water. cover the pitcher and refrigerate. steep white or green tea for 6 to 8 hours; steep black or oolong tea for 8 to 12 hours.jun 28, 2015