Physics, 21.08.2019 02:10 temoshojayne

Calculate the amount of heat needed to raise the temperature of 200g of ice from-30°c 50c water. (c = .5 for ice, c 1 for water, latent heat from ice to water 80 cal/g)

Answers: 3

Show answers

Answers

Answer from: delaneyjane1599

The amount of heat needed is 29000 Cal.

Explanation:

The process involved in this problem are:

$(1):H_2O(s)(-30^oC)\rightarrow H_2O(s)(0^oC)\\\\(2):H_2O(s)(0^oC)\rightarrow H_2O(l)(0^oC)\\\\(3):H_2O(l)(0^oC)\rightarrow H_2O(l)(50^oC)$

Now, we calculate the amount of heat released or absorbed in all the processes.

For process 1:

$q_1=mC_{p,s}\times (T_2-T_1)$

where,

q_1 = amount of heat absorbed = ?

m = mass of ice = 200 g

T_2 = final temperature = 0^oC

T_1 = initial temperature = -30^oC

Putting all the values in above equation, we get:

$q_1=200g\times 0.5Cal/g^oC\times (0-(-30))^oC=3000Cal$

For process 2:

$q_2=m\times L_f$

where,

q_1 = amount of heat absorbed = ?

m = mass of water or ice = 200 g

L_f = latent heat of fusion = 80 Cal/g

Putting all the values in above equation, we get:

$q_2=200g\times 80Cal/g=16000Cal$

For process 3:

$q_3=m\times C_{p,l}\times (T_{2}-T_{1})$

where,

q_3 = amount of heat absorbed = ?

m = mass of water = 200 g

T_2 = final temperature = 50^oC

T_1 = initial temperature = 0^oC

Putting all the values in above equation, we get:

$q_3=200g\times 1Cal/g^oC\times (50-0)^oC=10000Cal$

Calculating the total heat absorbed, we get:

Q=q_1+q_2+q_3

Q=3000+16000+10000=29000Cal

Hence, the amount of heat needed is 29000 Cal.

Answer from: Quest

Energy transformations are processes that convert energy from one type (e.g., kinetic, gravitational potential, chemical energy) into another. any type of energy use must involve some sort of energy transformation.energy must obey the laws of thermodynamics.thermodynamics is the study of how energy changes from one type to another. the laws of thermodynamics apply to energy and energy conversions.the first law of thermodynamics: main articleenergy cannot be created or destroyed (which is called the conservation of energy); however, it can be transformed from one type into another. in fact, every useful process transforms energy from one form to another. there are many different forms or types of energy. some examples of everyday energy transformations are: scenario energy conversions involvedrubbing hands together to make them warm kinetic energy to thermal energyusing a battery-powered flashlight chemical energy to electrical energy (in the battery)electrical energy to radiant energy (in the bulb)an object speeding up as it falls gravitational potential energy to kinetic energythe second law of thermodynamics: main articlesome forms of energy are more useful than others. using energy always makes it less useful, even though no energy is actually destroyed.kinetic energy and electricity are the most useful forms. these are "high-quality" because they can be transformed almost completely into any other type of energy. electricity, for example, can be easily used to generate heat (thermal energy) or light (radiant energy), break chemical bonds (chemical energy), move objects (kinetic energy), or lift objects (gravitational potential energy).the least useful form of energy is low-temperature thermal energy. it can still be converted back to a higher-quality form, but useful energy is always lost in this process. converting energy to a less-useful form and then trying to work backwards never gets 100% of the useful energy back.for example, when a car runs, the engine will become hot (thermal energy). the warmth of the engine does nothing to the car move or go faster. this wasted energy is an unavoidable by-product of converting the car's fuel (chemical energy) into movement ("high-quality" kinetic energy), however it can potentially be used for heating the cabin of the car to slightly increase overall energy efficiency. it is a challenge for all forms of power generation to minimize wasted energy and be as efficient as possible.

Answer from: Quest

Edit the post so i can see the letters for each answer, and increase the points required so i'd be able to answer it.

Another question on Physics

Physics, 21.06.2019 23:10

Which are examples of projectile motion? choose all that apply a. a soccer ball rolling across the ground in the northeast direction b. a car turning a corner, so it is heading south c. a javelin flying through the air d. a tennis ball lobbed over the net

Answers: 1

Answer

Physics, 22.06.2019 05:00

Does work output exceed work input when a machine is used? a) yes, it does, as machines create energy. b) it depends on the type of machine used. c) no, it doesn’t, as machines are inefficient. d) no, it doesn’t, as machines cannot create energy.

Answers: 1

Answer

Physics, 22.06.2019 15:30

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Answers: 1

Answer

Physics, 22.06.2019 17:00

Sawyer is studying diffraction. he draws a diagram of a plane wave to show how light waves travel. which best describes sawyer’s error? the wave fronts should be perpendicular to the direction in which the waves move. the arrow showing the direction of movement of the waves should be pointing to the left. the arrow showing the direction of movement of the waves should be pointing downward. the wave fronts should be both parallel and perpendicular to the direction in which the waves move.

Answers: 3

Answer

You know the right answer?

Calculate the amount of heat needed to raise the temperature of 200g of ice from-30°c 50c water. (c...

Questions