The largest observatory complex in the world is on mauna kea, the tallest mountain on earth. what are some factors astronomers consider when selecting an observatory site? don’t forget practical ones. should astronomers, for example, consider building an observatory on denali (mount mckinley) or mount everest?

Many machines- including inclined planes such as ramps- increase the strength of the force put into the machine but decrease the distance over which the force is applied. true or false

How many seconds does it take a pebble released from rest off a bridge to fall 29.4 m ? what is the pebble's speed when it has fallen 29.4 m ?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)