Physics, 07.08.2019 06:10 ErrorNameTaken505

A217 ω resistor, a 0.875 h inductor, and a 6.75 μf capacitor are connected in series across a voltage source that has voltage amplitude 30.0 v and an angular frequency of 220 rad/s . what is v at t= 22.0 ms ? what is vr at t= 22.0 ms ? what is vl at t= 22.0 ms ? what is vc at t= 22.0 ms ? what is vr? what is vl? what is vc?

Answers: 1

Show answers

Answers

Answer from: nicolemaefahey

For an AC circuit:

I = V/Z

V = AC source voltage, I = total AC current, Z = total impedance

Note: We will be dealing with impedances which take on complex values where j is the square root of -1. All phasor angles are given in radians.

For a resistor R, inductor L, and capacitor C, their impedances are given by:

$Z_{R}$ = R

R = resistance

$Z_{L}$ = jωL

ω = voltage source angular frequency, L = inductance

$Z_{C}$ = -j/(ωC)

ω = voltage source angular frequency, C = capacitance

Given values:

R = 217Ω, L = 0.875H, C = 6.75×10⁻⁶F, ω = 220rad/s

Plug in and calculate the impedances:

$Z_{R}$ = 217Ω

$Z_{L}$ = j(220)(0.875) = j192.5Ω

$Z_{C}$ = -j/(220×6.75×10⁻⁶) = -j673.4Ω

Add up the impedances to get the total impedance Z, then convert Z to polar form:

Z = $Z_{R}$ + $Z_{L}$ + $Z_{C}$

Z = 217 + j192.5 - j673.4

Z = (217-j480.9)Ω

Z = (527.6∠-1.147)Ω

Back to I = V/Z

Given values:

V = (30.0∠0+220t)V (assume 0 initial phase, and t = time)

Z = (527.6∠-1.147)Ω (from previous computation)

Plug in and solve for I:

I = (30.0∠0+220t)/(527.6∠-1.147)

I = (0.0569∠1.147+220t)A

To get the voltages of each individual component, we'll just multiply I and each of their impedances:

$v_{R}$ = I× $Z_{R}$

$v_{L}$ = I× $Z_{L}$

$v_{C}$ = I× $Z_{C}$

Given values:

I = (0.0569∠1.147+220t)A

$Z_{R}$ = 217Ω = (217∠0)Ω

$Z_{L}$ = j192.5Ω = (192.5∠π/2)Ω

$Z_{C}$ = -j673.4Ω = (673.4∠-π/2)Ω

Plug in and calculate each component's voltage:

$v_{R}$ = (0.0569∠1.147+220t)(217∠0) = (12.35∠1.147+220t)V

$v_{L}$ = (0.0569∠1.147+220t)(192.5∠π/2) = (10.95∠2.718+220t)V

$v_{C}$ = (0.0569∠1.147+220t)(673.4∠-π/2) = (38.32∠-0.4238+220t)V

Now we have the total and individual voltages as functions of time:

V = (30.0∠0+220t)V

$v_{R}$ = (12.35∠1.147+220t)V

$v_{L}$ = (10.95∠2.718+220t)V

$v_{C}$ = (38.32∠-0.4238+220t)V

Plug in t = 22.0×10⁻³s into these values and take the real component (amplitude multiplied by the cosine of the phase) to determine the real voltage values at this point in time:

V = 30.0cos(0+220(22.0×10⁻³)) = 3.82V

$v_{R}$ = 12.35cos(1.147+220(22.0×10⁻³)) = 11.8V

$v_{L}$ = 10.95cos(2.718+220(22.0×10⁻³)) = 3.19V

$v_{C}$ = 38.32cos(-0.4238+220(22.0×10⁻³)) = -11.2V

Answer from: Quest

Iwannasay c is the most accurate

Answer from: Quest

e/c, where e is its total energy

Another question on Physics

Physics, 21.06.2019 15:30

What is the maximum acceleration of the wing tips, in units of g?

Answers: 2

Answer

Physics, 22.06.2019 09:40

Aturntable a is built into a stage for use in a theatrical production. it is observed during a rehearsal that a trunk b starts to slide on the turntable 10 s after the turntable begins to rotate. knowing that the trunk undergoes a constant tangential acceleration of 0.31 m/s2, determine the coefficient of static friction between the trunk and the turntable.

Answers: 3

Answer

Physics, 22.06.2019 13:00

Aplayground merry-go-round has a radius of 4.6 m and a moment of inertia of 200 kg-m2 and turns with negligible friction about a vertical axle through its center. a child applies a 26.0 n force tangentially to the edge of the merry-go-round for 15.0 seconds. if the merry-go-round is initially at rest, how much work did the child do on the merry-go-round?

Answers: 1

Answer

Physics, 22.06.2019 16:10

To a of 4 x hz is 1. 0. mm nm nm

Answers: 1

Answer

You know the right answer?

A217 ω resistor, a 0.875 h inductor, and a 6.75 μf capacitor are connected in series across a voltag...

Questions