Auniform rectangular plate is hanging vertically downward from a hinge that passes along its left edge. by blowing air at 11.0 m/s over the top of the plate only, it is possible to keep the plate in a horizontal position, as illustrated in part a of the drawing. to what value should the air speed be reduced so that the plate is kept at a 30.0° angle with respect to the vertical, as in part b of the drawing?

The airspeed must be 7.78 m/s for the rectangular plate kept at 30°.

Explanation:

By looking at the images below wee see that the airspeed on one side of the rectangular plate decreases the statical pressure over this side. Since over the downside, the pressure still bein the atmospheric pressure. This difference in pressure produces a lift force in the plate. The list force is the net force obtained between the difference of the forces that produce the pressure over the upside and the downside:

Where up and down relate to what movement the forces produce. And p and V are the respective air density and velocity.

When the plate is kept horizontal the lift force balance the moment due to the weight of the plate and considering that both forces act at the same point:

By replacing the known values it is possible to find the plate's weight:

When the plate kept to 30° from the vertical the moment equation balance is written as:

The sine of 30° is due to the weight is 30° oriented, therefore the new value for the airspeed is:

weather forecasts are done by collecting data about the current state of the atmosphere mainly the temperature, humidity and wind and using meteorology, to determine the atmosphere that evolves over time. the h and l mean the high and low pressure. the red strip is a warm front. the blue strip is a cold front. the blue and red strip is a stationary front. the purple strip is a occluded front.

explanation:

grav force prop 1/r squared 2r all squared is 4rsquared 1/4rsquared quartered