Each of the gears a and b has a mass of 2.4 kg and a radius of gyration of 60 mm, while gear c has a mass of 12 kg and a radius of gyration of 150 mm. a couple m of constant magnitude 10 n × m is applied to gear b. determine the number of revolutions of gear c required for its angular velocity to increase from 100 to 450 rpm and the corresponding tangential force acting on gear a. (round the final answer to two decimal places.)

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water

the answer you are looking for is d. there are no holes for blood to enter or leave the system. your welcome