Arectangular key was used in a pulley connected to a line shaft with a power of 7.46 kw at a speed of 1200 rpm. if the shearing stress of the shaft and key are 30 mpa and 240 mpa, respectively what is the length of the rectangular key if the width is one fourth that of the shaft diameter?

Which law represents the thermodynamic statement of the conservation of energy of a system? a. the fourth law b. the first law c. the second law d. the third law

Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.

The bar of prob. 5/82 is repeated here. the ends of the 0.4-m bar remain in contact with their re- spective support surfaces. end b has a velocity of 0.5 m/s and an acceleration of 0.3 m/s2 in the di- rections shown. determine the angular accelera- tion of the bar and the acceleration of end a.