An overhang hollow shaft carries a 900 mm diameter pulley, whose centre is 250 mm from the centre of the nearest bearing. the weight of the pulley is 600 n and the angle of lap is 180°. the pulley is driven by a motor vertically below it. if permissible tension in the belt is 2650 n and if coefficient of friction between the belt and pulley surface is 0.3, estimate, diameters of shaft, when the internal diameter is 0.6 of the external. neglect centrifugal tension and assume permissible tensile and shear stresses in the shaft as 84 mpa and 68 mpa respectively.