Calculate the equilibrium number of vacancies per cubic meter for copper at 27°c and 1000°c, respectively. assume that the energy for vacancy formation is 0.9 ev/atom; the atomic weight and density (at both 27 and 1000 ° c) for copper are 63.5 g/mol and 8.4 g/cm3, respectively

If forces acting on an object are unbalanced, which factors may result fron an unbalanced force? check all that apply

Two technicians are discussing a resistance measurement between the can-h and can-l wires. technician a says this measurement should be done with the ignition switch in the "run" position. technician b states that a measurement of 0 ohms indicates an open in the network. which technician is correct?

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.