subject
Physics, 15.10.2019 14:10 siniyalee30

Is the moon blocking the sun an eclipse of the sun

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 00:10
The energy released by a chemical reaction can be measured using a calorimeter. when barium hydroxide octahydrate crystals are reacted with dry ammonium chloride inside of a coffee cup calorimeter, the temperature of the 18.00 g of water in the calorimeter decreases from 30.0°c to 8.0°c. the equation for calculating energy absorbed or released by a reaction is: where q is the energy released or absorbed, m is the mass of water in the calorimeter, cp is the specific heat of water, and δt is the observed temperature change. if the specific heat of liquid water is 4.19 j/g·°c, how much energy was absorbed by the reaction?
Answers: 3
question
Physics, 22.06.2019 02:40
15. one purpose of the tread pattern on a tire is to a reduce tire wear. b. reduce traction c. allow water to flow away from the tire. d. look impressive.
Answers: 1
question
Physics, 22.06.2019 08:00
Choose each of the settings that follow and list them below do it ill mark brainliest first object= position= speed= acceleration= second object= position= speed= acceleration=
Answers: 2
You know the right answer?
Is the moon blocking the sun an eclipse of the sun...
Questions
question
Mathematics, 11.12.2020 02:20
question
History, 11.12.2020 02:20
question
Advanced Placement (AP), 11.12.2020 02:20
Questions on the website: 13722367