subject
Physics, 10.10.2019 21:30 janaemartinez42

Atechnician wearing a brass bracelet enclosing area 0.00500 m2 places her hand in a solenoid whose magnetic field is 2.70 t directed perpendicular to the plane of the bracelet. the electrical resistance around the circumference of the bracelet is 0.0200 . an unexpected power failure causes the field to drop to 0.81 t in a time of 19.0 ms. (a) find the current induced in the bracelet. a (b) find the power delivered to the bracelet. (note: as this problem implies, you should not wear any metal objects when working in regions of strong magnetic fields.) w

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 05:20
Suppose an objects initial velocity is 10m/s and it’s final velocity is 4 m/s. mass is constant. what can best be concluded about the object based in the work-energy theorem
Answers: 2
question
Physics, 22.06.2019 11:30
1. a camcorder has a power rating of 19 watts. if the output voltage from its battery is 7 volts, what current does it use?answer units 2. a 1.5m wire carries a 6 a current when a potential difference of 57 v is applied. what is the resistance of the wire? yourunits 3. a clothes dryer uses about 2 amps of current from a 240 volt line. how much power does it use? yourunits 4.
Answers: 1
question
Physics, 22.06.2019 14:30
Aweight lifter raises a 1600 n barbell to a height of 2.0 meters. how much work was done? w = fd a) 30 joules b) 3000 joules c) 320 joules d) 3200 joules
Answers: 2
You know the right answer?
Atechnician wearing a brass bracelet enclosing area 0.00500 m2 places her hand in a solenoid whose m...
Questions
question
Chemistry, 12.02.2020 21:31
question
Mathematics, 12.02.2020 21:31
Questions on the website: 13722367