Physics, 19.12.2019 15:31 Yasminl52899
Amotor spins a gear with eight teeth. that gear is attached to a gear with 56 teeth. what is the gear ratio
a: 10: 1
b: 1: 7
c: 1: 8
d: 56: 1
Answers: 2
Physics, 22.06.2019 12:50
Assume you measured the mass of the cart to be (500 ± 1) g and the mass of the additional mass you put on the cart to be (500 ± 1) g as well. since the scale you are using in the lab cannot measure objects heavier than 600g you will have to sum up individual pieces and propagate the error. so what would be the mass and the standard error of the cart and the mass
Answers: 3
Physics, 23.06.2019 00:00
Which is an advantage of subdividing science into different areas?
Answers: 3
Physics, 23.06.2019 06:30
Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?
Answers: 2
Physics, 23.06.2019 10:50
If we decrease the time it takes for a car to travel over the same distance this will
Answers: 2
Amotor spins a gear with eight teeth. that gear is attached to a gear with 56 teeth. what is the gea...
Chemistry, 19.01.2020 22:31
Mathematics, 19.01.2020 22:31
History, 19.01.2020 22:31
Mathematics, 19.01.2020 22:31
Social Studies, 19.01.2020 22:31
Chemistry, 19.01.2020 22:31
Mathematics, 19.01.2020 22:31
Geography, 19.01.2020 22:31
Mathematics, 19.01.2020 22:31
Mathematics, 19.01.2020 22:31