Viewers of star trek hear of an antimatter drive on the starship enterprise. one possibility for such a futuristic energy source is to store antimatter charged particles in a vacuum chamber, circulating in a magnetic field, and then extract them as needed. antimatter annihilates with normal matter, producing pure energy. what strength (in t) magnetic field is needed to hold antiprotons, moving at 5.70 ✕ 107 m/s in a circular path 2.60 m in radius? antiprotons have the same mass as protons but the opposite (negative) charge. (enter the magnitude.)

The speed of sound in ice, water, and steam is shown. what best explains the speed of sound in different states of matter? sound travels fastest in ice because energy is easier to transfer when the molecules are close together. sound travels slowest in steam because the sound has to move around the gas molecules that are far apart. sound travels fastest in ice because the temperature of solids is always greater, so the heat transfers the sound energy. sound travels slowest in steam because the pressure is so great the sound cannot travel though the steam particles.

Ethanol has a heat of vaporization of 38.56 kj/mol and a normal boiling point of 78.4 c. what is the vapor pressure of ethanol at 14 c?

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.