Answers: 3
Physics, 22.06.2019 12:20
Aball with a mass of 275 g is dropped from rest, hits the floor and rebounds upward. if the ball hits the floor with a speed of 2.40 m/s and rebounds with a speed of 1.70 m/s, determine the following. (a) magnitude of the change in the ball's momentum (let up be in the positive direction.)
Answers: 1
Physics, 23.06.2019 03:30
Use the ratio form of kepler’s third law, = , and the data provided to determine the time it takes mars to orbit the sun. round your answer to the nearest tenth. earth’s orbital period = 1.0 earth year earth’s distance from the sun = 1.0 au mars’s distance from the sun = 1.5 au it takes mars about ⇒ 1.8 earth years to orbit the sun.
Answers: 2
Physics, 23.06.2019 07:30
5. why should the electrons be placed separate from each other (why not together)?
Answers: 2
Physics, 23.06.2019 08:30
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
What is the definition of half life...
Mathematics, 05.02.2020 07:49
Mathematics, 05.02.2020 07:49
Mathematics, 05.02.2020 07:49
Mathematics, 05.02.2020 07:49
Biology, 05.02.2020 07:49
Mathematics, 05.02.2020 07:49
Mathematics, 05.02.2020 07:49
Biology, 05.02.2020 07:49
Business, 05.02.2020 07:49
Mathematics, 05.02.2020 07:49
Mathematics, 05.02.2020 07:49
Mathematics, 05.02.2020 07:49
Mathematics, 05.02.2020 07:49