Define resistance and describe what would happen to a lightbulb if the voltage increase but the resistance stay the same?

The first question is how much of a voltage increase are we looking at. If it has a 110 voltage rating and you put it across a 220 source, you will see one flash and then the bulb is no more. Nothing will revive it.

If it is rated at 110 and you put 130 across it, there's no problem but the bulb will burn out sooner than it would if you just put 110 across it.

So you raise the voltage and the resistance stays the same, the current will increase. That's why it will burn out sooner.

V = I * R

The equation is a direct variation. If the voltage goes up the current goes up. If the voltage goes down, the current goes down providing that the resistance stays the same in both cases.

The second question is what is resistance? Resistance in Electricity is the ability of an electric current to go in one direction freeing up as many electrons as it can. The MORE free electrons, the lower the resistance. The FEWER free electrons the higher the resistance.

Here' the kicker. Ready? More and Less are probably the two most important words in beginning science.

The More the resistance, the Less the current flow. That's a really important consideration in battery drain in a watch (or modern day calculator). The More the Battery Drain, the Less time it will last.

Always be careful when more and Less are around.

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

answer///isobars;