Physics, 04.07.2019 03:30 pr173418

Heat engines were first envisioned and built during the industrial revolution. explain the thermodynamics of a heat engine commenting on its efficiency. your answer should be atleast a paragraph wrong anything less will be counted as incorrect

Answers: 1

Show answers

Answers

Answer from: Homepage10

Heat engines were developed during industrial revolution.

Generally a heat engine contains three parts i.e source, sink and working substance.

The source of a heat engine is present at a higher temperature as compared to the sink. Due to the temperature difference, the heat will flow from source to sink through working substance.

Let us consider $T_{1}\ and\ T_{2}$ are the temperature of source and sink.

As the source is at higher temperature as compared to sink, heat will flow from source to sink.

$Let\ Q_{1}\ and\ Q_{2}$ are the heat provided by source and heat rejected to sink.

Hence, the work done by the working substance will be -

$W\ =\ Q_{1}-Q_{2}$

The efficiency of a heat engine is defined as the ratio of output to the input energy.

Here output = workdone [W]

Hence, the efficiency of a heat engine is calculated as -

$Efficiency\ [\eta]=\frac{W}{Q_{1}}$

$\eta\ =\frac{Q_{1}- Q_{2}} {Q_{1}}$

$=\ 1-\frac{Q_{2}} {Q_{1}}$

This is the expression for the efficiency of heat engine.

Here, all the heat absorbed by the working substance can not be converted to desired output. The efficiency of a heat engine can not be 100 percent. Some amount of heat is lost in the form of sound and heat due to the friction which is produced due to the relative motion between various parts of the machine.

Heat engines were first envisioned and built during the industrial revolution. explain the thermodyn

Answer from: Quest

the answer is kevlar

Answer from: Quest

-first use of geothermal energy occurred more than 10,000 years ago in north america by american paleo-indians

-the first industrial use of geothermal energy began near pisa, italy in late 18th century

-in 1904, italian scientist piero ginori conti invented the first geothermal electric power plant in which steam was used to generate the power

-with the above experiment, the first geothermal plant in usa started in 1922 with a capacity of 250 kilowatts

-however, in 1946 first ground-source geothermal heat pump installed at commonwealth building in portland, oregon

-during the 1960’s, pacific gas and electric began operation of first large scale geothermal power plant in san francisco, producing 11 megawatts

-in 1973, when oil crisis began many countries began looking for renewable energy sources and by 1980’s geothermal heat pumps (ghp) started gaining popularity in order to reduce heating and cooling costs

-as effect of climate change started showing results, governments of various countries joined hands to fight against it, for which kyoto protocol was signed in japan in 1997, laid out emission targets for rich countries and required that they transfer funds and technology to developing countries, 184 countries have ratified it

hope this

Another question on Physics

Physics, 22.06.2019 04:00

Simple machines can a. increase force only b. decrease force only c. increase or decrease force

Answers: 3

Answer

Physics, 22.06.2019 05:00

Unpolarized light falls on two polarizer sheets whose transmission axes are at right angles. a third polarizer is placed between the first two so that its axis makes a 52-degree angle with the axis of the first polarizer. a) what fraction of the incident light intensity is transmitted through the first polaroid? b) what fraction of the incident light intensity is transmitted through the second polaroid? c) what is the angle of polarization of the light that enters the third polaroid? d) what fraction of the incident light intensity is transmitted through the third polaroid. e) what happens if the middle polaroid is removed?

Answers: 3

Answer

Physics, 22.06.2019 23:40

Certain bacteria (such as aquaspirillum magnetotacticum) tend to swim toward the earth’s geographic north pole because they contain tiny particles, called magnetosomes, that are sensitive to a magnetic field. if a transmission line carrying 100 a is laid underwater, at what range of distances would the magnetic field from this line be great enough to interfere with the migration of these bacteria? (assume that a field less than 5% of the earth’s field would have little effect on the bacteria. take the earth’s field to be 5.0 * 10-5 t, and ignore the effects of the seawater.)

Answers: 1

Answer

Physics, 23.06.2019 04:00

Only 3% of the water on earth is usable by humans. even though that 3% is through the water cycle, we still need to be careful not to waste water.

Answers: 2

Answer

You know the right answer?

Heat engines were first envisioned and built during the industrial revolution. explain the thermodyn...

Questions