How much power is necessary to do 50 j of work in 5 seconds

Laboratory experiments, observational field studies, and model-building are all examples of different forms of scientific investigations.  in what way do laboratory experiments primarily differ from other forms of scientific investigations?   a.  a laboratory experiment is the only accepted form of investigation within the scientific community.  b.  studies about how things behave in nature or studies involving very large objects are best answered through laboratory experiments.  c.  laboratory experiments involve the identification and control of variables.  d.  data can only be generated through laboratory experiments, not other forms of investigation.

Acommon technique in analysis of scientific data is normalization. the purpose of normalizing data is to eliminate irrelevant constants that can obscure the salient features of the data. the goal of this experiment is to test the hypothesis that the flux of light decreases as the square of the distance from the source. in this case, the absolute value of the voltage measured by the photometer is irrelevant; only the relative value conveys useful information. suppose that in part 2.2.2 of the experiment, students obtain a signal value of 162 mv at a distance of 4 cm and a value of 86 mv at a distance of 5.7 cm. normalize the students' data to the value obtained at 4 cm. (divide the signal value by 162.) then calculate the theoretically expected (normalized) value at 5.7 cm.

A75-hp (shaft output) motor that has an efficiency of 91.0 percent is worn out and is to be replaced by a high-efficiency motor that has an efficiency of 95.4 percent. the motor operates 4368 hours a year at a load factor of 0.75. taking the cost of electricity to be $0.12/kwh, determine the amount of energy and money saved as a result of installing the high-efficiency motor instead of the standard motor. also, determine the simple payback period if the pu