James needs to attach a stabilizing wire to a tall tower. The wire is 200 feet long and should be attached to the tower at a height of 100 feet. Assume that the ground around the tower is level and
that the entire length of the wire is used.
a. Draw a sketch of this situation and label any known lengths.

option a is correct.

step-by-step explanation:

scale factor: it is used to find proportional measurements.

proportions means having the same ratio.

scale factor is the ratio of the model measurement to the actual measurement in a simplest form.

or we can say that the ratio of any two corresponding lengths in two similar geometric figures

if the scale factor is more than 1, then it is an enlargement,

if the scale factor less than 1, then it is a reduction.

given the two geometric figure:

by definition of proportions, we have

0.32

step-by-step explanation:

2.24/7

a)(x-2)^2+(y-1)^2=9

step-by-step explanation:

(picture explains)

(b) 240

step-by-step explanation:

first, we use the pythagorean formula using the given side lengths to find x. then we use x to find the side lengths. then we add the side lengths to find the perimeter.

pythagorean theorem formula:

a^2 + b^2 = c^2

(x - 20)^2 + (x - 40)^2 = x^2

x^2 - 40x + 400 + x^2 - 80x + 1600 = x^2

x^2 -120x + 2000 = 0

(x - 100)(x - 20) = 0

x - 100 = 0 or x - 20 = 0

x = 100 or x = 20

we see that the solution x = 20 must be discarded because it will give a negative side length and a side length of 0. the only valid solution is x = 100.

perimeter = sum of the lengths of the sides

perimeter = x + x - 20 + x - 40

perimeter = 3x - 60

replace x with 100.

perimeter = 3(100) - 60

perimeter = 300 - 60

perimeter = 240