2. In the real-world, humans hear sound as an analog signal. This means the signal is a continuous waveform, which is completely processable by human ears. However, machines 'hear' sound a little
differently, as they process sound digitally, which is a discrete waveform.
When sound is recorded or transmitted electronically, the continuous (analog) waveform is sampled to
convert it to a discrete (digital) sequence. Sampling is the process of reducing a continuous-time
signal to a discrete-time signal. As the sampling rate increases, the sound quality of the recording or
transmission will improve.
The graphs below represent two different samples of a pure tone. Sample 1 is taken 8 times per unit
of time. Sample 2 is taken 16 times per unit of time.
I
Sample 1:

square root of 36/6 = 2.449489743

square root of 16/6 = 1.632993162

square root of 6 = 2.449489743

the answer is square root of 16/6 because the square root of 36/6 is the same answer as square root of 6 = 2.449489743

p ÷ r = tan(x)

step-by-step explanation:

given that there is a figure below shows a right triangle: a right triangle is shown with hypotenuse equal to q units and the length of the legs equal to p units and r units.

graph is missing so i will create the graph as per given information.

the angle between the legs having lengths p units and q units is y degrees. the angle between the legs having lengths r units and q units is x degrees.

now we need to find about what is p ÷ r equal to.

so we can use trigonometric ratio tan(x)=[altitude]/[base] to find the value of p ÷ r, because p is the altitude and r is the base.

p ÷ r=tan(x)

hence final answer is p ÷ r=tan(x).

open side up . . 1/50 . . 2%

closed side up . . 5/50 . . 10%

landed on side . . 44/50 . . 88%