M/PF Research, Inc. lists the average monthly apartment rent in some of the most expensive apartment rental locations in the United States. According to their report, the average cost of renting an apartment in Minneapolis is $951. Suppose that the standard deviation of the cost of renting an apartment in Minneapolis is $96 and that apartment rents in Minneapolis are normally distributed. If a Minneapolis apartment is randomly selected, what is the probability that the price is:

Step-by-step explanation:

a) $1,000 or more?

As the data is usually distributed, using the 3-step approach to solve the problem: draw the image (I'm not going to do it here), locate the z-point, and identify the region on the graph.

(1000-951)/96 = .5104 = 0.51 = Z, so area = 1 -0.6950 = 0.3050

b) Between $900 and $1,100?

(900-951)/96 = -0.53 = Z, and (1100-951)/96 = 1.55 = Z So area = 0.9394 - 0.2981 = 0.6413

c) Between $825 and $925?

(825-951)/96 = -1.31 = Z, and (925-951)/96 = -0.27 = Z So area = 0.3936 - 0.0951 = 0.2985

d) Less than $700?

(700-951)/96 = -2.61 = Z, so area = 0.0045

step-by-step explanation:

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).