subject

History, 11.07.2019 05:30 croxy0514

Which technological advances made world war 1 different from past wars? check all that apply. •trench warfare •poison gas •computers •submarines •radars •machine guns

ansver

Answers: 2

Show answers

Another question on History

question

History, 21.06.2019 13:30

Explain the difference between a physical change and chemical change

Answers: 1

question

History, 21.06.2019 14:30

What was the primary concern for the missouri statehood question

Answers: 2

question

History, 21.06.2019 20:00

How did the printing press make it difficult for the catholic church to stop the reformation? o a. priests were too busy printing and distributing bibles to oppose protestantism. o b. it created a growing middle class that was no longer interested in religion. o c. critics of the catholic church were able to quickly replace any hey writings the church destroyed. d. there were few printing presses in italy, where leadership of the catholic church was centered.

Answers: 3

question

History, 21.06.2019 21:30

Each of the following countries was part of the big four at the paris peace conference except a. russia b. italy c. germany d. britain

Answers: 1

You know the right answer?

Which technological advances made world war 1 different from past wars? check all that apply. •tren...

Questions

question

Chemistry, 14.09.2019 01:10

The gas phase dimerisation reaction takes place in a continuous constant pressure cstr operating at 1 atm total pressure (a) establish the relationshi...

question

Engineering, 14.09.2019 01:10

Two airstreams are mixed stea percent relative humidity retreams are mixed steadily and adiabatically. the first stream enters at 35°c and 30 ont rela...

question

Chemistry, 14.09.2019 01:10

Let's assume you have infinite amount of dilute aqueous solution of gold that only contains gold at a concentration of 1x10.10weight raction. if you w...

question

Engineering, 14.09.2019 01:10

When is it appropriate to model a structural element as a beam?...

question

Engineering, 14.09.2019 01:10

Astrain gauge with a 4 mm gauge length gives a displacement reading of 1.5 um. calculate the stress at the location of the strain gauge if the materia...

question

Engineering, 14.09.2019 01:10

What are the principal advantages of dic over strain gauges?...

question

Engineering, 14.09.2019 01:10

When there is no flow, the signal transit times between ultrasonic sensor pairs are x upstream and downstream. a. not applicable b. same c. different...

question

Engineering, 14.09.2019 01:10

The frequency of the changing zones of pressure corresponds to the x of passing vortices....

question

Engineering, 14.09.2019 01:10

Total flow can be calculated since the distance between two consecutive vortices corresponds to a defined volume....

question

Engineering, 14.09.2019 01:10

Specific internal energy is measured in energy per unit mass dimensions. what is 310 kj/kg in btu/lbm units?...

question

Engineering, 14.09.2019 01:10

The differential transit times of the signals going upstream and downstream is a direct measure of (x)....

question

Engineering, 14.09.2019 01:10

Using a coriolis meter is the only way the particular x of mass flow, density, volume flow, and flow velocity can be measured simultaneously. a. proce...

question

Engineering, 14.09.2019 01:10

It is critical to the measurement that any flow meter is installed in such a manner that is kept full of fluid at all times. a) true b) false...

question

Engineering, 14.09.2019 01:10

When sensors in this kind of flow meter sense a change in tube oscillation what is this phenomena called?...

question

Engineering, 14.09.2019 01:10

Laminar flow is the most desirable for flow measurements in pipes. a) true b) false...

question

Engineering, 14.09.2019 01:10

A1 m thick wall is made of concrete with a thermal conductivity of 1 w/m/k. there are temperature sensors on the wall's surface and buried within the...

question

Engineering, 14.09.2019 01:10

When piping systems contain bends in multiple directions in succession....

question

Engineering, 14.09.2019 01:10

Seawater has a specific density of 1.025. what is its specific volume in m^3/kg (to 3 significant figures of accuracy, tolerance +/- 0.5 m^3/kg)?...

question

Engineering, 14.09.2019 01:10

The amount of energy required to maintain the desired temperature difference is proportional to the cooling effect, and therefore, it is a direct meas...

question

Engineering, 14.09.2019 01:10

Thermal meters use principles of x in order to determine various flow process variables. a. fluid dynamics b. heat generation c. heat transfer d. ther...

More questions: History Another questions

Questions on the website: 13722363