subject
Engineering, 14.03.2022 08:10 pineapplepizaaaaa

Question 1 of 20 : Select the best answer for the question
1. Technician A says that manually opening an exhaust gas recirculation (EGR) valve with a vacuum pump or scan tool will cause the engine to idle roughly
stall. Technician B says that blocking the EGR valve passages will have no effect on the OBD-II. Who is correct?
O A. Technician A
O B. Both Technicians A and B
O C. Technician B
OD. Neither Technician A nor B
Mark for review (Will be highlighted on the review page)
Ned Question >>
Review My Answers
Save & E
Type here to search
#
15°F Clear
A

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
Question 1 of 20 : Select the best answer for the question
1. Technician A says that manuall...
Questions
question
English, 20.10.2020 06:01
Questions on the website: 13722360