Engineering, 04.03.2022 05:10 DVM117x017
A circular casting is 0. 3 m in diameter and 0. 6 m in length. Another casting of the same metal is elliptical in cross section, with a major-to-minor axis ratio of 2. 5 and has the same length and cross sectional area as the circular casting. Both pieces are cast under the same conditions. What is the ratio of the solidification times of the two castings
Answers: 2
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
A circular casting is 0. 3 m in diameter and 0. 6 m in length. Another casting of the same metal is...
History, 18.03.2021 01:30
History, 18.03.2021 01:30
Mathematics, 18.03.2021 01:30
History, 18.03.2021 01:30
Mathematics, 18.03.2021 01:30
Mathematics, 18.03.2021 01:30
Mathematics, 18.03.2021 01:30
Mathematics, 18.03.2021 01:30
History, 18.03.2021 01:30
Chemistry, 18.03.2021 01:30