Engineering, 08.02.2022 22:10 hannaho64
Describe how a planar (2D) linkage with respectively 1 DOF, 2 DOF, 3 DOF will move. What does it mean to have a linkage with more degrees of freedom than the dimension of space it lies in?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
Engineering, 04.07.2019 19:20
Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.
Answers: 1
You know the right answer?
Describe how a planar (2D) linkage with respectively 1 DOF, 2 DOF, 3 DOF will move. What does it mea...
Questions
Mathematics, 16.10.2020 16:01
Mathematics, 16.10.2020 16:01
Health, 16.10.2020 16:01
English, 16.10.2020 16:01
Mathematics, 16.10.2020 16:01
Computers and Technology, 16.10.2020 16:01
Mathematics, 16.10.2020 16:01
Mathematics, 16.10.2020 16:01
