Engineering, 08.02.2022 19:00 Eylul30
A 300-mm-long rod with a diameter of 4.5 mm is loaded with a 1500-N weight. If the diameter decreases to 4.2 mm. What is the Final length of the rod.
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 05.07.2019 04:30
Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?
Answers: 2
Engineering, 06.07.2019 02:30
Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.
Answers: 3
A 300-mm-long rod with a diameter of 4.5 mm is loaded with a 1500-N weight. If the diameter decrease...
Mathematics, 01.02.2021 20:50
Social Studies, 01.02.2021 21:00
Mathematics, 01.02.2021 21:00
Mathematics, 01.02.2021 21:00
Business, 01.02.2021 21:00
Mathematics, 01.02.2021 21:00
Mathematics, 01.02.2021 21:00
Computers and Technology, 01.02.2021 21:00
Mathematics, 01.02.2021 21:00