Using oxygen as the orifice gas?
a. decreases dross on the bottom surface of the cut
b...
Engineering, 25.12.2021 03:30 Angelofpink2590
Using oxygen as the orifice gas?
a. decreases dross on the bottom surface of the cut
b. increases the cutting speed when cutting stainless steel
c. eliminates hot shortness when cutting aluminum
d. increases the cutting speed when cutting carbon steel
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Questions
Mathematics, 03.11.2020 05:50
Mathematics, 03.11.2020 05:50
Mathematics, 03.11.2020 05:50
Mathematics, 03.11.2020 05:50
English, 03.11.2020 05:50
English, 03.11.2020 05:50
Chemistry, 03.11.2020 05:50
English, 03.11.2020 05:50
Mathematics, 03.11.2020 05:50
Mathematics, 03.11.2020 05:50
Mathematics, 03.11.2020 05:50
