Engineering, 14.12.2021 01:00 dominikbatt
1. Flexural Strenght Determination :
Test prism No. 1: Length 159.4 mm Width: 40.0 mm Height: 40.0mm
Mass : 582 g Maximum Load: 3.6 KN
Test Prism No. 2: Length : 159.4 mm Width: 40.0 mm Height: 40.0mm
Mass: 575 g Maximum Load: 3.6 KN
Test Prism No. 3: Length : 159.6 mm Width: 40.0 mm Height: 39.9 mm
Mass: 586 g Maximum Load: 3.6 KN
2. Compressive Strength Determination :
Maximum Load (prism halves) (kN) : 82.0 84.3 75.7 80.4 71.8 74.2
Decide, if the test is valid according EN 197-1!
Decide, if the cement complies with the requirements of EN 197-1
Answers: 3
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
1. Flexural Strenght Determination :
Test prism No. 1: Length 159.4 mm Width: 40.0 mm Height: 40.0...
Mathematics, 17.11.2020 23:10
Mathematics, 17.11.2020 23:10
Mathematics, 17.11.2020 23:10
Social Studies, 17.11.2020 23:10
English, 17.11.2020 23:10
History, 17.11.2020 23:10
English, 17.11.2020 23:10
Arts, 17.11.2020 23:10
Chemistry, 17.11.2020 23:10
Mathematics, 17.11.2020 23:10
German, 17.11.2020 23:10