subject
Engineering, 06.12.2021 19:50 jslaughter3

A mixture of air and a fine spray of gasoline at ambient (outside air) temperature is fed to a set of pistonfitted cylinders in an automobile engine. Sparks ignite the combustible mixtures in one cylinder after another, and the consequent rapid increase in temperature in the cylinders causes the combustion products to expand and drive the pistons. The back-and-forth motion of the pistons is converted to rotary motion of a crank shaft, motion that in turn is transmitted through a system of shafts and gears to propel the car. Consider a car driving on a day when the ambient temperature is 298K and suppose that the rate of heat loss from the engine to the outside air is given by the formula:
-Q1(kj/h) ~ 15x10^6/Ta(k)
where Ta is the ambient temperature.
a. Take gasoline to be a liquid with a specific gravity of 0.70 and a higher heating value of 49.0 kJ/g, assume complete combustion and that the combustion products leaving the engine are at 298 K, and calculate the minimum feed rate of gasoline (gal/h) required to produce 100 hp of shaft work.
b. If the exhaust gases are well above 298 K (which they are), is the work delivered by the pistons more or less than the value determined in Part a)? Explain.
If the ambient temperature is much lower than 298 K, the work delivered by the pistons would decrease. Give two reasons.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
A mixture of air and a fine spray of gasoline at ambient (outside air) temperature is fed to a set o...
Questions
question
Mathematics, 16.10.2019 10:50
question
Chemistry, 16.10.2019 10:50
question
Social Studies, 16.10.2019 10:50
Questions on the website: 13722363