Engineering, 25.11.2021 07:20 npaslayoy1bzj
A bending operation is performed on cold-rolled steel sheet in a V die. The die opening is 25 mm. The sheet is 4.0 mm thick and 25 mm wide. The tensile strength of the material is 300MPa. The resulting sheet metal part has an angle of 30 and a bend radius of 6 mm. Determine the bend allowance in mm.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
Engineering, 04.07.2019 19:10
A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.
Answers: 3
You know the right answer?
A bending operation is performed on cold-rolled steel sheet in a V die. The die opening is 25 mm. Th...
Questions
English, 20.02.2021 22:10
Mathematics, 20.02.2021 22:10
Mathematics, 20.02.2021 22:10
Geography, 20.02.2021 22:10
Mathematics, 20.02.2021 22:10
Health, 20.02.2021 22:10
Biology, 20.02.2021 22:10
Chemistry, 20.02.2021 22:10
Mathematics, 20.02.2021 22:10
