Engineering, 25.11.2021 06:00 lexipooh5954

You have specified a granite for the Spencer’s Kitchen and Butler’s Pantry. The slab dimensions are 66” wide by 120” long. Based on the project floor plan provided, answer the following questions. Remember to show all calculations. a. What is the overall depth of the counter including overhang? b. How many slabs of granite must be used for the kitchen and butler’s pantry? c. How many square feet of granite will be installed for the kitchen and butler’s pantry? How many seams will be required for this layout? 2. FLOOR PLAN / EDGE DETAIL Provide a hand-drafted or CAD drafted floor plan. On this plan, indicate where the seams will be located for your material. If you choose to change the shape of the peninsula, indicate the revision on your plan. You will also need to include an image of the Edge type you have selected. Examples can be found on page 120 in Figure 9.1 of your Estimating for Interior Designers textbook. PART B. LABOR CALCULATIONS 1. LABOR You have spoken with the granite fabricator and have received pricing for installation. There are no additional fees for measuring and templating as they are built into the installation price. There will be one hole cut for the sink. You will specify the specialty edging. Pricing Details -Price per sq. ft. - $96.00 installed -Price per hole cut out - $75.00 -Price for specialty edge - $625.00 (for entire kitchen) Answer the following question. Remember to show all calculations: What is the overall price for the installed countertop? (Do not include tax or mark-up)

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

To design a steam turbine to produce 12,000 hp power. a engineer comsiders using a steady state stean low st 1160fr and engineer considers using a steady state steam flow at 1160°r and 450 psia to drive this steam turbine. the exhaust of the steam is cooled by the lake (vacuum). heat losing to the surroundings is measured at a rate of 555.55 btu/s. (a) sketch the system with the given conditions. (b) neglecting kinetic and potential energy changes from inlet to exit, determine the volumetric flow rate of the steam at the inlet, (ft'/hr). must clearly show unit conversions at crtical terms.

Answers: 1

Answer

You know the right answer?

You have specified a granite for the Spencer’s Kitchen and Butler’s Pantry. The slab dimensions are...

Questions