Engineering, 24.11.2021 08:20 tyryceschnitker

For the method of standard addition, it is known that 1. the ethanol concentration of the standard addition solution you prepare needs to be at least 10% to yield a detectable Raman signal,
2. adding pure ethanol to the liquor sample will increase the ethanol content by up to 100%,
3. after adding water, the final volume should be 5.00 ml.
Tabulate the volumes of liquor and pure ethanol you need for each of the five standard addition solution you need to prepare.
"For standard addition method, prepare the solutions in 5.00 mL volumetric flasks. Mix well and pipette into glass vials. Avoid evaporation and take Raman spectrum of all 5 solutions. Repeat the above dilution and measurement with Gin and Vodka in the same way. Reuse the volumetric flasks after thoroughly rinsing with water."

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?

Answers: 2

Answer

You know the right answer?

For the method of standard addition, it is known that 1. the ethanol concentration of the standard...

Questions