2
Two strips of metal are pinned together as shown with a rod 10mm diameter. The ultimate
sh...
Engineering, 08.11.2021 14:00 angelakrill14091
2
Two strips of metal are pinned together as shown with a rod 10mm diameter. The ultimate
shear stress for the rod is 60MPa. Determine the maximum force required to break the pin.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Questions
Engineering, 04.01.2021 14:40
History, 04.01.2021 14:40
Computers and Technology, 04.01.2021 14:40
Social Studies, 04.01.2021 14:40
Mathematics, 04.01.2021 14:40
Mathematics, 04.01.2021 14:40
