Engineering, 30.10.2021 14:00 kaikao17801
The maximum pressure at the inlet is computed to by 101,325.14 Pa, which is higher than the pressure at the pipe exit, i. e., 101,325.00 Pa, as prescribed by the boundary conditions. What is the pressure drop predicted by the theory in the current configuration, assuming fully-developed pipe flow throughout the entire pipe
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
The maximum pressure at the inlet is computed to by 101,325.14 Pa, which is higher than the pressure...
Questions
French, 21.05.2020 02:08
Mathematics, 21.05.2020 02:08
Mathematics, 21.05.2020 02:08
Mathematics, 21.05.2020 02:08
Mathematics, 21.05.2020 02:08
Mathematics, 21.05.2020 02:08
Mathematics, 21.05.2020 02:08
